Excellence in level and flow measurement.

Level Measurement Overview 

Level measurement is either contacting or non-contacting, measuring continously between the minimum and maximum range or at pre-determined points. Continous measurement usually uses ultrasonic or radar technologies while point measurement is usually contacting, float, paddle or vibrating blade switch.

Continuous Level Measurement

level application wet welldiagram continious level

 

 

 

 

  •  

  • Measures continuously providing a control signal between minimum and maximum range. 

  • Non-contacting, unaffected by contaminants or debris. 

  • Ultrasonic or radar technology. 

  • Choose radar when measuring volatile organic compounds.  

Recommended Products Non-contacting

Ultra 5 controller Blackbox controllerIMP + 

Recommended Products Contacting

 


Differential Level Measurement

diagram level differential

Differential level screen

 

 

 

  •  

  •  

  • Employs two transducers, one for each level. 

  • Differential level indicates build-up of contamination on screen or filter. 

Recommended Products

 Ultra 5 controller 

 


Point Level Measurement

level application pointlevel application point

 

 

 

 

  •  

  • Measures at a single level point. 

  • Switch usually in contact with the medium being measured. 

  • Prone to damage and contamination.

  •  Controls switching of alarms and pumps. 

Recommended Products

float switchpaddle switchvibrating blade switch 

If you are unsure about which product is suitable for your application please contact Pulsar on the following telephone numbers:-

  • Malvern, UK +44 (0)1684 891 371
  • Florida, USA +1 850 279 4882

 

Essential SSL